THIS PRODUCT IS DISCOUNTINUED. PLEASE CONTACT US FOR AVAILABILITY.
The Innova Series of portable gas monitors are designed to protect workers from hazardous gases in confined spaces and other industrial work sites. The Innova features a powerful built-in pump, rugged electronics for the harshest conditions, simple operation, quick calibration, and robust sensors for long life. The Innova Series Portable Gas Monitors are available in several different gas combinations.
KEY FEATURES
- Easy to use one-button calibration
- Peak, STEL, and TWA readings displayed on request
- Interchangeable 4 -"D" NiCad batteries (12 hrs) or alkaline (24 hrs)
- Dual protection if liquid is aspirated
- Built-in pump meets federal regulations for pretesting confined spaces & remote areas
- Built-in datalogger
- Bright LED array (for alarm conditions), 180˚ viewable, plus glow-in-the-dark buttons
- RF resistant
- Five combustible gas ranges from super sensitive 0-1,000ppm to 0-100% by volume
- Water-resistant, rugged high impact Xenoy housing
- Configurable for one, two, three, or four plug-in sensors
MODELS
Innova ST – One, Two, Three, or Four Gases
This multi-gas internal pump monitor is ideal for pre-testing confined spaces in refineries, wastewater treatment plants, fire departments, offshore oil wells, fish processing plants, utilities, tanneries, etc. This unit can be configured to monitor up to four gases in several combinations, including the detection of hydrocarbons in the % Vol., LEL or ppm range, oxygen content, and a choice of one or two toxics: Ammonia (NH3), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Cyanide (HCN), Hydrogen Sulfide (H2S), Nitrogen Dioxide (NO2), Nitric Oxide (NO), Phosphine (PH3), or Sulfur Dioxide (SO2).
• Monitors hydrocarbons in LEL or PPM ranges as a standard
• Microprocessor electronics and convenient top-mounted switches make operation and calibration simple
• Easy replacement of batteries and sensors
Innova FV – Fuel Vapor
Innova FV is designed to measure combustible fuel vapors in aircraft wing tanks and fuel storage areas. This instrument monitors for oxygen content and hydrocarbons in either percent LEL or PPM.
• Extra sensitive PPM combustible range (0-1000 ppm) in 10 ppm increments
• Humidity resistant, combustible sensor is not affected by changes in relative humidity (RH)
• Calibrated with hexane to represent fuel vapors
Innova LS – Land Surveyor
The Innova LS is designed to test for methane and other gases in landfills, vaults, trenches, bar holes, vents, and other applications. This multi-gas monitor detects methane in the ppm, % LEL, and % Vol. ranges, oxygen, and one toxic gas (either carbon monoxide or hydrogen sulfide).
• Monitoring of methane in two optional range sets
• Autorange adjusts to the correct range as methane concentrations increase, allowing hands-free operation
Innova SV – Soil Vapor
The INNOVA SV is designed for applications such as soil remediation and bar-hole monitoring. Designed to detect total hydrocarbons (including methane) in percent LEL or PPM, and includes unique operation mode selection for non-methane hydrocarbons.
• Dual mode operation can distinguish between methane or natural gas and other volatile combustibles
• Extra sensitive PPM combustible range (0 - 1000 ppm) in 10 ppm increments
• Humidity resistant combustible sensor is not affected by changes in the relative humidity (RH)
Innova XT – Transformer
Innova XT tests for the presence of combustible gases in the inert headspace of power transformers. It offers significant time and cost savings over the traditional dissolved gas analysis. The test is simple, as results are given in real-time. One instrument is able to test many transformers. This unit can monitor hydrocarbons in percent LEL or PPM, as well as oxygen content.
• Extra sensitive detection in PPM or LEL is standard
• Significant cost savings over dissolved gas analysis (DGA)
• All necessary accessories (dilution fitting, probe, and two tedlar bags) come standard with each unit
SPECIFICATIONS
| Sensors | Combustibles: Catalytic compensated Electrochemical: Cl2, CO, HCN, H2S, NH3, NO, NO2, O2, PH3, SO2 Methane (Innova LS): Thermal Conductivity |
| Sampling Methods | Sample-draw, internal pump |
| Response Time | 90% in 30 seconds 90% in 50 seconds (HCN) 90% in 60 seconds (NH3) |
| Accuracy | LEL: ± 5% of reading O2: ± 5% Vol. ppm, Cl2, CO, HCN, H2S, NH3, NO, NO2, PH3, SO2: ±10% of reading |
| Repeatability | LEL: ± 2% of reading O2: ± 0.2% Vol. ppm, Cl2, CO, HCN, H2S, NH3, NO, NO2, PH3, SO2: ± 5% of reading |
| Operating Temperature | -4°F to 113°F (-20°C to 45°C) |
| Humidity Range | 0 to 95% RH, non-condensing |
| Alarms |
♦ user defined, programmable alarm levels
♦ latching or self-resetting modes
♦ low battery, low flow, or sensor failure
♦ two levels of alarm with audible & visual indication to warn of unsafe gas levels
|
| LCD Display |
♦ real-time gas concentrations
♦ date & time
♦ battery capacity
♦ alarm set points
♦ backlight on demand
♦ TWA, STEL, minimum & maximum readings
|
| Power Sources | Four “D” alkaline or NiCd batteries |
| Battery Life | Alkaline: 24 hrs at 68˚F (20˚C) NiCd: 12 hrs at 68˚F (20˚C) |
| Dimensions | 10 in. (254 mm) L x 6 in. (152 mm) H x 5 in. (127 mm) W |
| Weight | Approximately 5 lbs. (2.25 kg) |
| Casing Materials | High impact, chemical, and RF resistant Xenoy (polycarbonate-polyester) plastic |
| Splash Resistance | Water-resistant, gasketed housing |
| Approvals | CSA Certified Intrinsically Safe to U.S. and Canadian Standards, Hazardous Locations Class I, Groups A, B, C & D LCIE Certified, EEX ia d IIC T4 Hazardous Locations |
| Warranty | One year (materials and workmanship) |
RANGE OF GASES DETECTED
| Gas | Formula | Standaed Range | ST | FV | LS | SV | XT |
| Ammonia | NH3 | 0 to 100 ppm in 1 ppm increments | X | ||||
| Carbon Monoxide | CO | 0 to 300 ppm in 1 ppm increments | X | X | |||
| Chlorine | CI2 | 0 to 10.0 ppm in 0.1 ppm increments | X | ||||
| Combustible | HC | 0 to 100 % LEL in 1% increments 0 to 1,000 ppm in 10 ppm increments 0 to 10,000 ppm in 20 ppm increments |
X |
|
|
|
|
| Hydrogen Cyanide | HCN | 0 to 30 ppm in 1 ppm increments | X | ||||
| Hydrogen Sulfide | H2S | 0 to 200 ppm in 1 ppm increments | X | ||||
| Methane | CH4 | 0 to 5% Vol. in 0.1% increments 0 to 100% Vol. in 1% increments 0 to 10,000 ppm in 20 ppm increments 0 to 100 % LEL in 1% increments |
X |
X X X X |
|||
| Nitric Oxide | NO | 0 to 100 ppm in 1 ppm increments | X | ||||
| Nitrogen Dioxide | NO2 | 0 to 9.9 ppm in 0.1 ppm increments | X | ||||
| Oxygen | O2 | 0 to 30.0% Vol. in 0.1% increments | X | X | X | X | |
| Phosphine | PH3 | 0 to 3.00 ppm in 0.1 ppm increments | X | ||||
| Sulfur Dioxide | SO2 | 0 to 10.0 ppm in 0.1 ppm increments | X |
OPTIONAL ACCESSORIES
- Data logging retrieval kit
- Storage case
- Remote audible alarm
- Float probe
- Hydrophobic filter
- 30" probe with dust filter
- Moisture trap
- Dilution fitting
- Extra length hoses, up to 100 ft. for sample draw pump
- Confined space kit
- Calibration kit
- Battery charger (220 VAC, 115 VAC, 12 VDC)
DOWNLOADS